1 Watt Outdoor Access Point With 2 LAN Ports with 1.6 Meters Antenna- White


Antenna Specifications:Model NO: ARF-SP(1920-2170)-15Frequency Range-MHz: 1920-2170Bandwidth-MHz: 250Gain-dBi: 15Horizontal Bear width:°360Vertical Bear width: -°5VSWR: ≤1.5Input Impedance: -Ω 50Polarization: VerticalMaximum Power -W 100Connector: N-femalePackage Dimension:(L X W X H) 160 x 3.5 x 3.5Package Weight: 0.779g

1 Watt Outdoor Access Point With 2 LAN Ports Specification:RF: Atheros AR9285 – CPU: AR7240 (400MHz)Antenna – Default configuration: 8dBi integrated directional antenna (vertical pol.)Antenna Configuration: 1 * 1 (1 Tx, 1 Rx)External RF connector: N type male connector – switchable by softwareMemory: Flash 8MB / DDR 32MB8MBModulation: OFDM: BPSK, QPSK, 16-QAM, 64-QAM / DSSS: DBPSK, DQPSK, CCKAvailable Data Rates (Mbps): IEEE 802.11g – 54, 48, 36, 24, 18, 12, 9, 6RF Frequency: USA (FCC) 2.412GHz – 2.462GHz (Channels 1-11)Average RF Output Power (± 1.5dB): 802.11nReceiver Sensitivity: 802.11bRegulatory Compliance: 1Mbps: ≤ -93dBm54Mbps: ≤ -73dBm / HT20/MSC0 ≤88dBm / HT40/MSC0 ≤84dBmStandards: FCC Part 15, CE EN300 328, EN301 489-1/17, EN60950Web Language: English
Firmware Upgrade Method: Web upgrade via Ethernet or Wireless port / TFTP upgrade via Etherent portStatus Information
Statistics for Wireless and Ethernet
Connection statusSystem Basic Settings
Device Name APXXXXXXCountry/Domain: 
USA FCCTime NTP: DisableIP Settings
IP Address assignment (DHCP/Manual): DHCP /, DHCP is the default, however when server is not present the unit reverts to
Accounting and Authentication: DisableBasic Wireless SettingsOperation mode (AP / CPE)APAP mode functions1. SSIDWireless2. Hide SSID (enable/disable)Disable3. Channel select (1-11)14. Client limitations (0~32)325. Wireless client isolation (enable/disable)Disable6. Tx flow control (1~2400*64Kbps)1687Client mode functions 
1. SSID: AnyBridge modeAp repeater mode